Roller cleaner – Reclean

Our Anilox Cleaner –  Reclean was specially developed for water and UV-based inks and lacquers on anilox rollers and printing accessories. You can use this more dilute roller cleaner for inline washing systems as well as the manual cleaning of your anilox rollers. With the periodic use of the Anilox Cleaner –  Reclean, you benefit from a highly economical cleaning process that guarantees an optimum cavity volume of your rollers. Find out more about the application, features and precautionary measures of our Anilox Cleaner –  Reclean with just one click.

Physical and chemical properties

Ingredients: Softener, active agent, mist suppressant, alkaline mixture,

Density: 1.18 PH ≈12

Flash point (°C) : > 94 persistence and degradation under 101.3 KPA

Soil mobility: Soluble in water, can be transported in soil,

Bioaccumulation: Low bioaccumulation

Use and storage

GE: this product is for spray use, to ensure the full infiltration time of Anilox Roll 10-15 minutes, quick and efficient use of steel wire brush, clean water can be noted: before cleaning, please be sure to anilox roll rough wash and dry, in order to save unnecessary waste use environment temperature lower, can increase the soakage time this product is a low volatile, if you need to soak for longer, do not need to wrap film Labor Protection Measures: This product is very little harm to the human body, however, it is still recommended that you wear a mask and rubber gloves;

packaging and storage: this product is stored in PP or PE containers, the use of PET containers is strictly prohibited; storage environment to avoid high temperature, open fire